Will Vishnu also intoduce a product like JB+ or SSTT?

p996c2 · 02-03-2009, 08:53 AM

Does anybody know?

munters · 02-03-2009, 08:56 AM

I would doubt so. It's not the way he tunes.

NYBMW335 · 02-03-2009, 09:28 AM

I don't think so, there is only so much you can do with a tmap sensor. So it would just come to pricing. And we know BMS does a little better on pricing then vishnu. Plus BMS is already using those chips to upgrade their JB3, so they have knowledge and R&D with the chips.

It would not be a smart decision on Vishnu tuning to go into that market. Unless they know something I don't.

OpenFlash · 02-03-2009, 09:38 AM

Quote:

Originally Posted by NYBMW335

I don't think so, there is only so much you can do with a tmap sensor. So it would just come to pricing. And we know BMS does a little better on pricing then vishnu. Plus BMS is already using those chips to upgrade their JB3, so they have knowledge and R&D with the chips.

It would not be a smart decision on Vishnu tuning to go into that market. Unless they know something I don't.

Wouldn't really need a chip for this purposes since there is no RPM signal to reference signal offsets off of. Or boost control solenoids to drive. Basically a plug-in JB1X by the sound of it. Hence the solenoid bypass and low boost pressure or diagnostic visibility. Just begging for a $5 DIY using discrete components. No, I have no plans on posting one

Shiv

NYBMW335 · 02-03-2009, 09:44 AM

I guess i was wrong about the *chips and R&D. But at least i was right saying he wont go into that market.

p996c2 · 02-03-2009, 10:52 AM

Thanks!

OpenFlash · 02-08-2009, 06:25 PM

Quote:

Originally Posted by NYBMW335

I guess i was wrong about the *chips and R&D. But at least i was right saying he wont go into that market.

Don't bet on that

I just said that I had no plans to post a free DIY/schematic.

Shiv

Move.Over · 02-08-2009, 06:59 PM

Quote:

Originally Posted by shiv@vishnu

Don't bet on that

I just said that I had no plans to post a free DIY/schematic.

Shiv

But you did last year, remember the Happy Meal Tuner.
Didn't Terry start that way, looking at a simple resistor tune getting all kind of info from you and the Tuner wars started

http://www.e90post.com/forums/showpo...6&postcount=22

http://www.e90post.com/forums/showth...matic+resistor

http://www.e90post.com/forums/showthread.php?t=65097

OpenFlash · 02-08-2009, 07:12 PM

lol... this one wont be a simple resistor tune.

Quote:

Originally Posted by Move.Over

But you did last year, remember the Happy Meal Tuner.
Didn't Terry start that way, looking at a simple resistor tune getting all kind of info from you and the Tuner wars started

http://www.e90post.com/forums/showpo...6&postcount=22

http://www.e90post.com/forums/showth...matic+resistor

http://www.e90post.com/forums/showthread.php?t=65097

Proper Motion LLC · 02-08-2009, 07:15 PM

Good luck Shiv, the more competition the better

Hurry it up tho!

Proper Motion LLC · 02-08-2009, 07:16 PM

But if it really cost $5 dollars to make, sell it for $200 and smoke the competition!

OpenFlash · 02-08-2009, 07:16 PM

Quote:

Originally Posted by 09AlpineTTSedan

But if it really cost $5 dollars to make, sell it for $200 and smoke the competition!

It will smoke the competition for other reasons

Shiv

Hit_Apex · 02-08-2009, 07:40 PM

You gonna tool-up the connectors?

E92AXM · 02-08-2009, 07:44 PM

Shiv isn't talented enough to create something as simple as the JB+.

j.k

kenneth · 02-08-2009, 07:51 PM

Quote:

Originally Posted by SiNiStErE92

Shiv isn't talented enough to create something as simple as the JB+.

j.k

mmmmh! reverse psychology!

E92AXM · 02-08-2009, 07:57 PM

FotiosF90M5 · 02-08-2009, 07:57 PM

Quote:

Originally Posted by shiv@vishnu

It will smoke the competition for other reasons

Shiv

c,mon shiv...your killin me. how many tunes do I have to try?

OpenFlash · 03-05-2009, 07:31 PM

Well... I wasn't joking.

Info, pics and dyno results up later tonight

Shiv

jpsimon · 03-05-2009, 07:45 PM

hah really?

OpenFlash · 03-05-2009, 07:49 PM

Quote:

Originally Posted by jpsimon

hah really?

Yep. Consists of a single subconnector patch (no taps/pin extractions/etc) and a hand-held controller that you can adjust while driving. Pretty LED lights too

I found the TMAP connector housings so I can make it SSTT/JB+ like in terms of installation. But I would have to give up some of the functionality (like the hand held interface, RPM input, expandability, etc.,) I just can't get myself to degrade a tune on purpose. But if TMAP installation is more important to people than performance and safety, we would consider it.

I'll post up pics tonight of the naked board/controller. With dyno runs too.

Shiv

Proper Motion LLC · 03-05-2009, 09:22 PM

You think you'll be able to make it diagnostically invisible for MDS81 cars regardless of the PSI? (obviously not gonna be 15+ PSI)

Rotary Rasp · 03-05-2009, 09:42 PM

Quote:

Originally Posted by 09AlpineTTSedan

You think you'll be able to make it diagnostically invincible for MDS81 cars regardless of the PSI? (obviously not gonna be 15+ PSI)

lol... you said invincible

02-03-2009, 08:53 AM	#1
p996c2 New Member 2 Rep 22 Posts Drives: 318IS E30/335I E92/Alpina B5 Join Date: Sep 2006 Location: Netherlands & Switzerland iTrader: (0)	Will Vishnu also intoduce a product like JB+ or SSTT? Does anybody know?
	Appreciate 0 Tweet Quote

02-03-2009, 08:56 AM	#2
munters Captain 11 Rep 677 Posts Drives: E91 335XI AT Dakota Black M Join Date: Jun 2007 Location: Switzerland iTrader: (0)	I would doubt so. It's not the way he tunes. __________________ 59 Corvette, 72 240Z, 73 Espada, ZXR
	Appreciate 0 Quote

02-03-2009, 09:28 AM	#3
NYBMW335 Lieutenant 11 Rep 420 Posts Drives: BMW 335i jet black/black Join Date: Oct 2006 Location: NYC iTrader: (1)	I don't think so, there is only so much you can do with a tmap sensor. So it would just come to pricing. And we know BMS does a little better on pricing then vishnu. Plus BMS is already using those chips to upgrade their JB3, so they have knowledge and R&D with the chips. It would not be a smart decision on Vishnu tuning to go into that market. Unless they know something I don't.
	Appreciate 0 Quote

02-03-2009, 09:44 AM	#5
NYBMW335 Lieutenant 11 Rep 420 Posts Drives: BMW 335i jet black/black Join Date: Oct 2006 Location: NYC iTrader: (1)	I guess i was wrong about the *chips and R&D. But at least i was right saying he wont go into that market.
	Appreciate 0 Quote

02-03-2009, 10:52 AM	#6
p996c2 New Member 2 Rep 22 Posts Drives: 318IS E30/335I E92/Alpina B5 Join Date: Sep 2006 Location: Netherlands & Switzerland iTrader: (0)	Thanks!
	Appreciate 0 Quote

02-08-2009, 07:15 PM	#10
Proper Motion LLC Custom Powder Coater 148 Rep 2,784 Posts Drives: White 335i Sedan Join Date: Dec 2008 Location: Orange County CA iTrader: (2)	Good luck Shiv, the more competition the better Hurry it up tho! __________________ www.propermotion714.com
	Appreciate 0 Quote

02-08-2009, 07:16 PM	#11
Proper Motion LLC Custom Powder Coater 148 Rep 2,784 Posts Drives: White 335i Sedan Join Date: Dec 2008 Location: Orange County CA iTrader: (2)	But if it really cost $5 dollars to make, sell it for $200 and smoke the competition! __________________ www.propermotion714.com
	Appreciate 0 Quote

02-08-2009, 07:40 PM	#13
Hit_Apex Riding the knock sensor 2432 Rep 1,616 Posts Drives: 21 X5MC \| 23 M4CSL Join Date: May 2008 Location: PCH iTrader: (1) Garage List 2021 BMW X5MC [0.00]	You gonna tool-up the connectors? __________________
	Appreciate 0 Quote

02-08-2009, 07:44 PM	#14
E92AXM First Lieutenant 117 Rep 313 Posts Drives: 335i Join Date: Sep 2008 Location: Fl iTrader: (0)	Shiv isn't talented enough to create something as simple as the JB+. j.k
	Appreciate 0 Quote

02-08-2009, 07:57 PM	#16
E92AXM First Lieutenant 117 Rep 313 Posts Drives: 335i Join Date: Sep 2008 Location: Fl iTrader: (0)
	Appreciate 0 Quote

03-05-2009, 07:31 PM	#18
OpenFlash 1750 Rep 17,960 Posts Drives: A Lot Join Date: Sep 2006 Location: SF Bay, CA iTrader: (0) Garage List 2018 Ducati Panigal ... [0.00] 2016 Mazda CX5 [0.00] 2017 Aprilia Tuono ... [0.00] 2019 BMW M2 Competi ... [0.00] 2015 BMW M5 Competi ... [10.00] 2016 Ducati XDiavel S [0.00] 2016 AMG GT S [0.00] 2011 Ferrari 458 It ... [0.00] 2017 Charger Hellcat [0.00] 2015 KTM Super Duke ... [0.00] 2016 KTM RC390 [0.00]	Well... I wasn't joking. Info, pics and dyno results up later tonight Shiv
	Appreciate 0 Quote

03-05-2009, 07:45 PM	#19
jpsimon Team Zissou 3084 Rep 10,198 Posts Drives: 2022 AWD M3 Comp - SMB Join Date: Dec 2006 Location: CT iTrader: (7)	hah really?
	Appreciate 0 Quote

03-05-2009, 09:22 PM	#21
Proper Motion LLC Custom Powder Coater 148 Rep 2,784 Posts Drives: White 335i Sedan Join Date: Dec 2008 Location: Orange County CA iTrader: (2)	You think you'll be able to make it diagnostically invisible for MDS81 cars regardless of the PSI? (obviously not gonna be 15+ PSI) __________________ www.propermotion714.com Last edited by Proper Motion LLC; 03-05-2009 at 09:52 PM..
	Appreciate 0 Quote