BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i) - View Single Post - Stainless steel or aluminium pedal set (alternative to Performance pedals)

JimD · 09-16-2011, 12:54 PM

I used 1/8 for all the holes. I had to cut one bolt with a dremel tool so I would not interfere with WOT. I found the hardest part of the installation was removing and reinstalling the gas pedal. There is only one bolt and it is easy, the hard part is the electrical connector and the slide on connector for the pedal assembly. I needed to take the pedal off to get to the nuts on the bottom bolts. Once it was out of the car, cutting the little bolt was a piece of cake.

Jim

09-16-2011, 12:54 PM	#49
JimD Brigadier General 410 Rep 3,559 Posts Drives: 128i convertible Join Date: Apr 2009 Location: Lexington, SC iTrader: (0)	I used 1/8 for all the holes. I had to cut one bolt with a dremel tool so I would not interfere with WOT. I found the hardest part of the installation was removing and reinstalling the gas pedal. There is only one bolt and it is easy, the hard part is the electrical connector and the slide on connector for the pedal assembly. I needed to take the pedal off to get to the nuts on the bottom bolts. Once it was out of the car, cutting the little bolt was a piece of cake. Jim __________________ 128i Convertible, MT, Alpine White, Black Top, Taupe Leatherette, Walnut, Sport Ordered 5/22/09, Completed 6/4/09, At Port 6/9/09, On the Georgia Highway 6/13/09, Ship Arrived Charleston 6/24/09 at 10pm, PCD 7/21/09
	Appreciate 0 Quote