[MikeVictor]

My rear oddments tray became scuffed and I wanted to replace it. Here's how.

Step 1) Remove the rear seat. This is easy enough, just pull it toward the front of the car and slightly upward with gentle pressure and it will pop free. A good opportunity to vaccuum under the seat too.

Step 2) Flip the seat over onto a flat surface. Carpet is ideal to protect the leather from marks.

You will notice the three metal rods, the two end ones of which are attached to the oddments tray.

Step 3) Unhook the section toward the rear of the car first, taking car to clear the four thin protrusions out of the way. It should unhook fairly easily without forcing anything.

Step 4) Unhook the other end and push the tray through.

Step 5) reattach the replacment tray following the reverse order above and reinstall the seat to the car.

Step 6) Relax knowing your interior trim is once again looking fine and you can put your OCD daemons to rest. Until next time at least.