A friend of mine asked me how I filled the transmission with fresh oil. I used an automotive syringe-like device, made by
Pressol. It can suck or push oil/fluids. It holds roughly 500ml of fluid - and it works quite well. It can be found at most German hardware stores. I bought mine at Hornbach for 22 euros. For anyone stationed in Germany you can input your city's German zip code here to find a Hornbach near you...
http://www.hornbach.de/cms/de/de/mei...t/maerkte.html
You can ask for an,
Öl-Absaugpumpe
Pressol Saug- und Druckspritze (suction and pressure syringe) Amazon.de has them one sale right now.
http://www.amazon.de/Carpoint-065624...830116&sr=8-46
To remove the old diff fluid I used a oil change vacuum pump. Most MWR car craft shops should have an industrial tool that can suck old oil from the car's dipstick tube. Just use one with some 8mm vacuum hose attached to the end. Then insert it inside the diff's fill hole and suck out the old diff oil.
Hornbach also sells a fluid vacuum pump(made to suck out fuel, but it should also work for diff oil. Just make sure the oil is warm/hot). The suction tool is made by
Einhell ( Benzin-Ölabsaugpumpe)
http://www.amazon.de/Einhell-Benzin-...31867&sr=1-159
Hope this helps future guys to change their fluids!
Dack