Quote:
Originally Posted by stovesax08
I just started having a similar issue. The drive side window is stopping about 3/4" above where it should when rolled down. I can push it down another 1/4" in the track but then it stops. When rolling up, the window will hit the top of the doorframe and then back off to ~1/2 way between up and down. Doing the reset procedure hasn't seemed to affect the behavior and after trying a few times the window will stop responding to switch input for ~30 minutes. I'm wondering if just because the window has forgotten where it should be or if there is something else wrong
|
I'll try to help you. The window reset procedure is all ou need, unless you modified the window regulator.
the 30 second to 2 min time out is normal, i recall turning off the car & locking doors helped speed up the recovery.
Try the reset procedure but hold the down and up longer.