Quote:
Originally Posted by ONDEMAND
Your actual load is exceeding (overshooting) the requested load by ECU and that is triggering throttle closures. Further more the throttle closures are causing the timing corrections, but....this is not a proper WOT log.
You need to turn off all DSC | DTC nannies, and log a full throttle WOT run from say 2,000-6,000 rpm through 3rd gear.
If you dont do this specifically as described above you will see timing pull and throttle flutter as this is typical of the ECU at lower loads. The key is to get the engine running to target, and with minimal throttle and timing fluctuations at 100% throttle.
Log it again
|
ok i did what you said. 2 Data logs 93oct
1)
http://datazap.me/u/socrates-tii/2nd...=0&data=2-3-13
2)
http://datazap.me/u/socrates-tii/1st...-3-13&mark=241
__________________
MHD Custom Flash (E85) [Jake@MOTIV] / Vargas Stage 2 Turbos / Fuel it LPFP Stage 3+/ Moitiv Port Injection/ MMP Turbo Inlets/ 3.5 Tmap Sensor / ER FMIC /ER Chargepipe HKS-BOV / AA Downpipes / Agency Power Race mid pipes / Berk Technology race exhaust / BMW SSK / BC Forged Whees Toyo R888 tires / KW Club sport coilovers+KW Camber Plates / Spec stg2+Spec SMSFW/ APR Wing GTC200