Quote:
Originally Posted by digitallyblue
Resurrecting this old thread. Has anyone else had any easier methods of removing this sealant? I'm in the same scenario here. I spent about 4 minutes on the sealant and it wasn't giving away very easily at all. I imagine it would take many hours to remove it all with a Dremel, and I'm worried about damaging the fender in the process.
|
I just did this last weekend and I used a dremel with the wire brush attachment. It took 30-45 mins per side (just to clear the goop). I had to get a mirror to make sure I cleared everything out. It is a real pain to roll the rears.