Quote:
Originally Posted by yllwwgn
1. I'd say I netted about 5mm in additional space per side. Doesn't sound like much but in terms of fender-to-tire clearance, that's huge.
2. The grinding/cutting Dremel disks I used were small (maybe 1.5" diameter)... I could tell even by sound alone if it touched anything other than rubber/goop in the channel.
3. I am in Arizona, so moisture is far from a concern... but I would suggest probably squeezing in some RTV or silicone sealant into the channel once complete.
|
Great info!
When you say you netted 5mm from rolling, are you talking about the rear fenders only?
I'm curious how much clearance there is to be gained in the front fender from rolling alone. There is obviously much less of a lip to work with there.
__________________
[SIZE="1"]JB4 ISO, PURE Turbo Stage 1 v2, Megan DP, 5" stepped VRSF FMIC, AFE CAI, Fuel-it Stage 1 inline LPFP, ER Charge Pipe, KWV3 w/swift spring conversion, M3 Front Control Arms, e90 M3 FSB, Whiteline RSF Inserts, Dinan Camber Plates