|
Well, I did the install, but have thus far been defeated by the coding. I did add $676 to the VO, but I can't write to or read from the 2URAD with NCS; I get a message saying the module doesn't respond. Hence, when I access the head unit's hidden menu, it still ID's as stereo rather than hifi. Gongs are very loud and annoying and the sound was initially very brassy and bassy until I turned bass and treble way down. I also tried an SG_RESET, which worked, but the HU won't pick up $676 from the VO and change to hifi.
I've found quite a number of similar posts on the interwebs, with no clear resolution to any of them. The dominant theory seems to be that the 2URAD is on the MOST bus and hence can't be coded via k-dcan; only an ICOM interface will work. Right now I'm wondering if ISTA/P could do this with its ICOM emulation? Some say yes, some say no...
Anyone got any input? Thanks,
ianc
|