View Single Post
      03-22-2017, 09:13 PM   #7
jymmijamez
New Member
United_States
0
Rep
7
Posts

Drives: 2009 BMW 135i
Join Date: Oct 2015
Location: Fort Myers Beach

iTrader: (0)

Garage List
The back chrome trim is just held on by molding tape same as the 135i chrome emblem on the back. Just work a corner and slowly run a smaller trim tool with a terry cloth to protect paint a few times an the piece should lift off.

For the front window trim just roll down the windows and open the door to get the edge slowly to lift up and work towards the side mirrors.

On the top trim work the back corner with a trim tool using a terry cloth or similar to protect the paint. You should here a click but keep working it slowly til the trim pops out and slowly work toward the front of the car repeating this. Once you get to the door edge you should be able to pull the rest of the trim off using both hands with out much issue.
__________________
2009 Space Grey 135i 6MT - FBO Phoenix Intake PFS Stage 4 and PI w/ JB4 MHD BEF VTT GC Lites MFactory Limited Slip - 534hp 488tq (uncorrected for Mile High elevation)
Appreciate 0