|
Ok, so I shall answer my own question...
It looks like I have to remove the rear seat backrest and side panels in order to route the wiring. I will have to start this later after work and will post my progress to help anyone else silly enough to attempt this. I hate pulling stuff out of BMWs as they tend to not go back together the same and it breaks then you have to pay $$$$$$$.
First, I need to remove the rear headrests, then the plastic guides the slot into. Then I can unscrew the two screws at the bottom of the backrest and pull it out.
Hopefully at that stage I might be able to route the wiring harness, but if not I would have to remove way more stuff, such as the upper and lower rear side trims!!
|