|
I just finished with same ebc rotors.Hit that retaining bolt hard with an impact. Trying to do it the old fashioned way i stripped 2. I used an electric harbor freight impact on the other 2 and came out easy. I got out 1 stripped one, but the other is unrepairable. But im thinking about doing all 4 wheel bearings and new hubs soon. But they are just for holding the rotor in place while putting on the caliper. So i dont have one on my front brake. Used lugs to hold on the rotor while finishing. But the others got new bolts. I used pentosin dot4. Brakes were tight and grabby. But i didnt bed them either. Car went right back up on jackstands
|