Quote:
Originally Posted by N54andS63TU
So I jumped the pin 1 and 2, amp turned on, no sound tho I have CCC HU 08 135i, factory coding logic 7 amp. Do I still need to code it?
|
You should code it to make sure your radio communicates the proper EQ settings and DSP profiles to the AMP.
The DIRAC amp does not seem to support "Music" or "Movie" mode DSPs.
Only "Surround" on or off, which itself appears to be Dolby Pro Logic on or off.
One thing I don't understand on my setup is that the DIRAC system appears to be MUCH quieter than the L7 system I had previously.
There must be a setting in the CIC radio that is not set correctly.
