Quote:
Originally Posted by ShocknAwe
In for this too.
Additionally what offset and width do you recommend for 1M clone bodywork and nonM rear subframe track width. I'm assuming 9.5et22 it's still the front spec.
|
Correct on the fronts. For staggered I tend to recommend the 18x9.5 ET22 up front. It looks great with a bit of camber. 10.5 ET22 can fit for the rear especially if you've done the e9x hub conversion for a bit of extra room.
This car is running that exact fitment:
https://apexwheels.com/gallery/bmw/1...port-gold-1351
If you want a less aggressive front wheel, you can go to a ET28 9.5. If the car is going to be track-focused, 18x10 ET25 square is a good option provided you've got enough camber dialed in up front via camber plates.
-Tom