|
This is super helpful, thank you.
I’m going to do the following in order:
1- get the individual audio speakers
2- get the e9x cable from the head unit to the individual Audio amp from the same source as the speakers
3- check for physical compatibility of that cable to the back of my NBT evo head unit
4- follow the other steps you’re suggesting
I’ll report back my findings but I figure worst case, I can install the individual audio speakers and use a multi channel aftermarket amplifier if the individual Audio amp doesn’t work or coding and wiring can’t make all this work.
Thank you for your help and patience with me and all my questions.
|