Quote:
Originally Posted by E46M3forRay
I believe the front will fit. I’m on 19x9.5 LMs +8 with 275 tires and there’s still room between the tire and spring. Front camber is at -2.8 front and it’s flush on the fender line. No poke.
I would snatch this from you if it clears my 380mm brembo which sadly and quite positive that it wont.
GLWS !!!
|
Quote:
Originally Posted by PRTSB1M
https://www.wheel-size.com/calc/?whe...cl=30mm&sr=0mm
I've used some online calculators to gauge before going to different setups, they're not 100 percent accurate since we know not all tires run true to size. Comparing your setup isn't possible without knowing the tire size to be mounted, but 275/35 is most likely for a 18x10; so I used that.
Calculator says:
Tire is 3mm closer to suspension components. Rim is 9mm closer to suspension components. Rim will stick out 3mm farther.
If you're flush at -2.8 (the max setting for vorshlag plates w/OEM perches), tucking another 3mm should be possible if you're not maxed on camber. So, you might be right that the fronts would fit (stock brakes), but would certainly be in the "very aggressive" fit category. Prolly look sick, though. 
|
Thanks for the input guys. I am not sure if it will clear the brembo bbk, but this set up cleared my Stoptech ST60 w/ 380mm disc. It might worth a try!