Quote:
Originally Posted by Ilma
I am very interested in getting spacers for my stock rims on the 135i, but I swapped the stock runflats for Yokohama S-drives.
Same tire specs as stock at 215-40-18 F and 245-35-18 R, but they do appear to be wider due to squarer shoulders.
Tire Rack specs the section widths and tread widths to be almost identical as the stock Bridgestone RFT's, but I wonder whether the Yoko's will run with your suggested 18mm front and 10mm rear spacers. 
The poster with the Dunlop Direzza's indicated he rubbed, but his tires were 225F and 255R.....which are about 1/4 inch or 5-6mm wider.
Any experience from customers with the Yokohama's on this setup? |
So I will answer my own question for the benefit of others who may be running the Yokohama S drives.......
I just put these spacers on this week and they work perfectly with them.
Nice look = fills up the fenders but doesn't look like you are poking out beyond the edge......just up to it.
Highly recommended.
Now if I could just figure out how to install the Macht Schnell airscoops. I honestly thought they simply dropped in beneath the stock air plenum, but looks like this is not the case.