Quote:
Originally Posted by Satalite
I took the assembly off so I could easily access that side. However, I could not remove the pedal from the boot... which still caused problems getting into that small space! 
I used tape and grabbed the nut and held it in place, then put the screw through and started spinning! Like you, I did find myself spending 2/3 of the hour it took installing these on that particular accelerator pedal. Everything else was a breeze. |
By taking the assembly off you mean the aluminum pedal? I used double sided tape, attached it to the tip of my index finger, attached the tiny nut to it and held it in a very small place and put screw through. Looks like we both realized that using a sicky tape was the only way to do it without removing the gas pedal.