Quote:
Originally Posted by uberschnell
Quote:
Originally Posted by dsocold
1m mirrors i purchased part# 51168051913/4 (L/R).
my oem 135i mirrors have 3 pins and these 1m ones have 5 pins??
reading what you stated earlier about analog vs din... but i just dont get it because my oem 3 pin mirrors are plane jane they dont dim fold or nothing but yet they got 3 pins.....
|
Quote:
Originally Posted by eeghie
3 pins conduct continous power and digital control signal(LIN-bus), the drive signal for mirror adjust are produced locally inside the mirror. The 5 pins conduct analog drive signals for the mirror adjust motors, and heat. The analog signal originates from the mirror adjust switch in the door.
Without vehicle option code 313 or 430 in your vehicle options list you have 5 pins, with you have 3 pins.
|
3 pins = S43OA yes, means your car is DIN, eeghie is right on, you need PN
51168051923/24
will also need DIN mirror glass 51168041953/54 |
if i were to get these would these mirrors include auto fold and auto dim ? I already have the auto fold switch so i am assuming with some coding maybe it can be done..
I might just stick to manually moving my mirrors i already have the 300plus expensive mirror lenses i got for free which was a blessing from a totaled m3 so all i need is the 510 dollar units instead of the bargain 285 dollar ones i dont think its worth the upgrade for me 1800 dollars a mirror assmbly with glass and cover is way to much for an m mirror set