Just noticed my passenger rear tire is rubbing in the same spot. TBH, I never hear any rubbing so I was surprised to see the rubbing on the fuel filler neck.
For those of you that have rubbed a hole all the way through, how hard is it to replace the fuel filler neck? It looks fairly straight forward but just want to make sure I am not missing anything.
I am running ARC 8 et62 9.5" with sumitimo HTR3 275/35, 3mm spacer, suspension is TC DA M3 shock with the dinan shock mount bushing. I am guessing the additional suspension travel is allowing the wheel to travel further up and make contact. I have a 5mm spacer I can try, but IIRC, it was causing slight rub on the fender lip. And I do not even know if the extra 2mm is enough to avoid making contact on the fuell filler neck.
Next set of tires are going to be 255 so I can avoid this completely.
|