Quote:
Originally Posted by phish
Hi, after following this guide https://www.1addicts.com/forums/show....php?t=1338304 (option #5) to modify VO in order to change from a lead acid to AGM battery I received the following error after the very last step after clicking F1 Code Car in NCS expert. Every step before this last one worked fine.
This is from my NCSExpert error log:
[18:31:57.953] [2018-04-19] [SERIE] 2000 Error LFCDHDIA.CPP (A_E65R.IPS/IPO) CDHapiResultText 1
[18:31:57.953] [2018-04-19] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei SYS-0008: Job nicht gefunden RDCKWP
[18:31:58.114] [2018-04-19] [SERIE] 2000 Error COAPI2.CPP coapiRunCabd 6
[18:31:58.114] [2018-04-19] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei CODIERINDEX_LESEN
[18:31:58.156] [2018-04-19] [SERIE] 2000 Error COAPI.CPP coapiReadCodierIndexFromSg 5
[18:31:58.156] [2018-04-19] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei CODIERINDEX_LESEN: A_E65R
[18:32:05.619] [2018-04-19] [SERIE] 2020 Error LFCDHDIA.CPP (A_E65DR.IPS/IPO) CDHapiResultText 1
[18:32:05.619] [2018-04-19] [SERIE] SG antwortet nicht IFH-0009: SG nicht angeschlossen oder meldet sich nicht ULF2_HI
[18:32:05.762] [2018-04-19] [SERIE] 2020 Error COAPI2.CPP coapiRunCabd 6
[18:32:05.762] [2018-04-19] [SERIE] SG antwortet nicht CODIERDATEN_LESEN
================================================== ==============================(9)
Any help you can provide would be greatly appreciated. |
Might have something to do with the DATEN files used?
Instead of process entire car you can process the 2 modules that have been identified as being affected:
"Then I didn't want to process the whole car since I saw some people got problems with that.
So I did:
- SG_CODIEREN > CAS
- SG_CODIEREN > NFRM "