Quote:
Originally Posted by simp15d
Hi GJM120,
thanks heaps, I may have all two cases; Driver, software install
I will try to switch off the internet and antivirus;
thanks heaps,
Now that I know I don't need to flash to use INPA and the other software I will exhaust all avenue to trouble shoot the software and recover my laptop and start new. If it's successful then I will start reviewing all the programming etc.. starting with installing the reverse camera.
thanks once again.
Cheers,
Daniel
|
Good luck. I haven't done it, but, there have been quite a few reverse camera installs on the forums so you should be able to find some guidance.
The install is finicky to say the least. Also, a bad cable can cause it not to work properly. I have the Bimmergeeks std tools package and using their cable. Oddly enough I have more difficulty with INPA than NCS Expert. That may be only due to the fact that so much of INPA is in German (which I don't speak).
And don't forget to turn your antivirus back on when reconnecting to the internet.