Quote:
Originally Posted by Mark James
When I tap into that fuse with the yellow wire my car will not go to sleep.
I am a little confused about the wiring. The instructions in the xtrons forum says "Most commonly this is resolved by Reversing the Lines, this is simply removing the RED and YELLOW wire and exchanging their position in the ISO"
Any tips on how I can save my radio stations memory and make my car sleep with the xtrons ?
Thanks in advance.
|
Hello Mark, the Red is for +12V from ignition and the Yellow is +12V directly from battery. What they are saying is: We made a mistake and put the cables incorrectly in the harness. I would 1st take a look at other wires from all the pictures in google. Regarding the fuse box, check the picture I uploaded, I did use the 3rd fuse from bottom left. In a 135i works well, for other models, you will need a multimeter to test and a lot of patience
