Are there any 1M/E9X M3 owners here interested in the slonik brembo monobloc caliper upgrade? (he can manufacture them to suit 135/335i albeit you'd need rotors also!)
Slonik mentioned he can offer a small discount, which will work out around to be $2500 AUD delivered for the front 6 pot monobloc calipers which includes braided brake lines, colour of your choice, decal of your choice (///M, new & old style brembo lettering) (he also offers 4 pot rear calipers at an additional cost of course)
These calipers can be manufactured to suit the oem E9X ///M 360mm rotor & the larger 380mm F8X ///M rotors or slonik offers many rotor alternatives for the more serious guys who track their cars (2 piece rotors or carbon ceramics)
Brake pad changes are very easy, just one sliding pin which is locate din the centre of the caliper.
https://www.m3post.com/forums/showthread.php?t=1423661
Brake bias calcs for various compounds:
OEM ///M brake balance is 65% on the front.
6 piston brembo setup on oem rotor, you'll get 66.5% on the front.
6 piston brembo setup on f8x 380mm rotor you'll get 71% on the front.
front 6 piston brembo + oem rotor (360mm), rear small 4 piston brembo with 52mm pad height on oem rotor (350mm) 65.5% on the front
6 piston brembo + oem rotor (360mm), rear large 4 piston brembo with 62mm pad height on oem rotor (350mm) 64.1% on the front
6 piston brembo + f8x rotor (380mm), rear small 4 piston brembo with 52mm pad height on oem rotor (350mm) 68.4% on the front
6 piston brembo + f8x rotor (380mm), rear large 4 piston brembo with 52mm pad height on oem rotor (350mm) 65.5% on the front
6 piston brembo + f8x rotor (380mm), rear large 4 piston brembo with 62mm pad height on oem rotor (350mm) 67.1% on the front
Please let me know if you're keen!
