I've tried 235/40 and 225/40 on the 7.5" wheels with the 20mm spacers and I get some rub so I really doubt the 245's will fit without rubbing.
That being said, the 245/35 is a smaller diameter than both so there's some hope I guess. The PO had the car roughly an inch lower in the front than I do (at least the coilover perch was an inch lower) with factory 215's up front and it didn't rub from what I recall (only drove it like that for a few hundred KMs last year).
Quote:
Originally Posted by jjFender
Okay, if you already have extra wheels then a 12mm spacer should be all you need to fit the rear 8.5" wheel up front. Your M3 controls arms and dinan camber plate should give you about -2° camber so you should be able to stay within the fenders. ...maybe even test with your 20mm spacers. Might be able to get away with it without having to buy new spacers.
|