Quote:
Originally Posted by dmytro98
I know this is an old thread but I was wondering if you found a solution to this issue as I'm having rubbing in the same exact spot you're talking about with coilovers, m3 arms and dinan camber plates for about 2.5 degrees of camber.
|
What kind of coilovers?
I was running Bilstein B12s and had no rubbing with 17x8 ET50 and 245/40R17 RE71Rs and -2.7 of camber. Camber was through Dinam plates and M3 arms.
Now that I'm running Redshift BC Coilovers, I've lost about 3-4mm of clearance. The collar for the shock adjuster is wider than the Bilstein. With a 5MM spacer, it's fine.
The biggest thing is the M3 arms - they reduce clearance by 4-5mm. If you have camber plates and they are maxed out, there are other ways to get more camber without using the M3 arms.