Quote:
Originally Posted by Dekdo
I believe I found the 135i m sport option on FCP. What other things would be needed?
Shock mount lower
Shock mount upper
Shock bump stop
Anything else?
|
- the metal supporting cup
- the rubber sealing grommet.
Neither are expensive and you should be ok to reuse them when you get your BMWP springs.
- the bolts for the lower shock mounting (2 per side and kind of pricey for a torx bolt)
For the upper mounts, Monroe makes a hard rubber product that is inexpensive and a bit of an upgrade from the foam-like OE ones. (I'm assuming you're are NOT on runflats).
I don't know if the B4 has internal bumpstops. If not, you will almost certainly need new bumpstops unless they were replaced recently. They tend to degrade to the point of crumbling.