Just about to take the clamps off tonight. I did the top half on Sunday night (my entire glass fell out), and the bottom half yesterday afternoon. It's humid and in the mid 50s here, so it sounds like it should be cured about now based on the spec PDF for window weld. The top half seems to be holding well.
Mandinca and @dusty.brown your instructions were very helpful - thanks!
If anyone wants to purchase the suction clamps (I have 10 good ones and 2 that are possibly good if cleaned up but possibly not) and I can toss the 3M primer + urethane (which may go bad by the time they're shipped over) in the box too, let me know. I sealed the window weld with a screw in the cap and then zip tied the finger from a rubber glove around it, so it's possible it stays good for a while - who knows. Clamps by themselves were almost $100, so I'd let it all go for $50 shipped.
These are the clamps:
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1