Quote:
Originally Posted by Maurzog
Hey thanks for response! Ok so what if all the m3 arms and bits as well are being put on the 135i? There should not be an issue correct, e9x lower rear camber arm should allow the shocks to fit.
What about the ride height? Also is there any precedent to switching to linear springs such as Swift.
Sorry 1M guys for posting about the vanilla here but the original question was one I knew you could answer.
|
You can do that for the rear and the M3 KW CS will work in the rear, but for the front you will need the complete spindle, hub and brakes.
You are better off finding a KW CS for 135/335i or buy a new high quality kit.