View Single Post
      07-16-2018, 08:39 PM   #8
dsocold
Captain
American Samoa
198
Rep
684
Posts

Drives: f06 640i GC. E82 N54 135i
Join Date: Apr 2015
Location: new york

iTrader: (0)

Quote:
Originally Posted by uberschnell View Post
Quote:
Originally Posted by HyeWarrior View Post
Wait does it really?

Would it be feasible to buy E92 mirrors and use the existing triangle on our doors?
Speaking from first hand experience. I purchased a set of e92 mirrors for my 135i. Eeghie is correct in that the e92 triangle / base is different. Most importantly the 3 mounting posts are in different locations then the e82. I took a long hard look at swapping the bases and concluded it would just be too difficult and too much a risk

I can't confirm anything about e90 compatibility.

As for the caps, I purchased 1m mirrors and m3 caps and they fit fine.

The other big difference in the features. There is analog (no auto dip or dimming) and DIN (auto dip and dimming). Analog is 5 pin and DIN is 3. Analog will not work on a DIN car, the mirrors will both adjust to full up and be completely uncontrollable.

As for the mirror glass, First hand experience again, these are also NOT interchangeable between DIN and non DIN. The connectors on the back of the glass are 4 wires vs 2. Unfortunately, the difference in price between the 2 is a couple hundred dollars, per glass.
would you know why my oem mirrors that were non auto dimming, non autofold, were replaced with 1m mirrors that also are non auto dip and non auto fold are not working on my car when i connect either side mirror it makes my whole driver side switch unfunctional no control over windows or anything for that natter until i unplug the mirror assembly
Appreciate 0