Quote:
Originally Posted by swagon
Yo, mate, do you think ARC8 8.5" ET38 and 9" ET42 will work on a slightly lowered 135i. I know for a fact that 9" ET44 with a 245-section tire works in the rear, but not sure about the front. I've seen guys with square 8.5 ET38 setups but think that's gonna rub without any fender mods. Couldn't get them to answer me.
|
Thanks for the post! The 18x8.5" ET38 is recommended for the front when you're running certain aftermarket coilovers that reduce inner clearance. With most other suspensions, the 18x8.5" ET45 is recommended.
The 18x9" ET42 is a bit too aggressive to work in the rear, and wouldn't maximize all available space within the fender to run the widest possible tire.
We produced the 18x8.5" ET45 front and 18x9.5" ET58 rear specifically for the 1-series, since it makes the best use of all available fender space to allow the widest possible tires with minimal (if any) modification required.
Quote:
Originally Posted by puppydax
Figured I'd add a photo of my 1'er with Arc 8's. LOVE them.
|
So good! Thank you for sharing.
