View Single Post
      01-23-2017, 03:03 PM   #26
aroonkl
New Member
4
Rep
17
Posts

Drives: 135i
Join Date: Sep 2016
Location: Tampa, FL

iTrader: (0)

At the end, all work out, anything rubbed?
Did you need to roll fenders?
Quote:
Originally Posted by fboutlaw View Post
So rarely do I get to use this but...

Boom Shaka Laka!

285/35-18 Yokohama ADVAN NEOVA's on Apex ARC-8's


Clearance inside:


To Outside... I can't get a good image because it's very tight.


Rubber!


Conclusion:
They work, but I haven't maxed out the suspension or pulled the springs to check clearance all the way up. If there's going to be any issue, it's going to be on the outside, which can most likely be remedied with a fender roll. To keep the clearances where they're at, I'm going to replace the links with M3 variants so that there's no bushing play and check clearances while the suspension is apart in the next few weeks.

So far... slam dunk! And they ride soooo much better than the PSS's
Appreciate 0