Quote:
Originally Posted by imported_mega
ohh in for a set what length swift springs should I convert to for front clearance? I'm using et42 17x9 now and they rub after pulling quite a bit, I might be able to pull them in more and fit 255s if I can get the spring perch up above the tire.
i'm running miester r zeta crd coilovers
|
Thanks for your interest! We unfortunately don't have much experience with those coilovers. What size front spacer are you currently using? As you mentioned, if you can raise your ride height or move to a shorter spring to get the spring perch up above the tire, you should have a lot more room to play with.
Quote:
|
Originally Posted by Phloozy
have you test fit 245 R7s? curious how much rolling/pulling is required with these? I am rolled as much as i can in the rear and rolled flat in the front. Awesome either way! Just need a 17x9.5 and 17x10 now :P
|
We haven't tested the R7s yet in those sizes, however the 255/40-17 NT01 we have tested has a section width of 10.35" compared to the 10.3" section width of the 245/40-17 Hoosier R7. It shouldn't be too hard to fit.
Quote:
|
Originally Posted by Mach3M3
In for the group buy
|
Glad to hear it!
Feel free to ask if you have any questions about the process.
-Ian