Quote:
Originally Posted by The Wind Breezes
Hate to be the bearer of bad news but while you may well have cable issues your issue NOW is the ECU isn't in standard state and will need to be bench flashed. It doesn't make sense that your cable would connect before and at least get you far enough to (temporarily) brick the computer and now you can't connect at all so it must be the cable...no, it's the ECU.
|
I really hope that is not the case. I was able to connect to the ECU once after the first failed flashing, but couldn't upload the stock rom because it said 'failed to flash ecu, unable to erase memory'. Haven't been able to connect since.