Quote:
Originally Posted by lsturbointeg
Hey Lups! Thanks! those help with not having to bend over so much when loading and unloading your clothes or whatever you wash. much better on your back! if you build it make sure you use 2 layers of MDF board or 1 OSB and 1 MDF on top. I used a single OSB board at first but when the dryer went into spin mode it rocked back and forth. so i ended up using 3/4" MDF on top and it worked good luck!
|
I never use mdf for anything. That material is not even so common here, we finns are weird.
I have done a million versions of a laundry room, I've put table tops on top of those two and all, and I've always hated the bending and folding laundry in the wrong night. It is quite pathetic i never considered lifting those two up from above the ground. I think I'll make a drawer for the detergents under the machines too.
My husband wants me to build us a house, but i hate the current building code here so I'm trying to find one i could renovate. I've been less than thrilled with the pressure to just come up with something, so this is quite a thrill to get excited about even a laundry room!