Back on the rollers tonight, at Advan Performance.
This time spraying a little methanol.
Well, actually a lot of Meth, hehe.
IIRC, the maximum flow rate was equivalent to approximately 775 cc or mL per minute.
The meth pump was running at a duty cycle of 70%.
As such I consider the dual CM7 injectors, to be well sized for this application and target boost level.
The ambient temp in the dyno cell was 25 degrees Celsius.
All the pulls tonight were started from an engine speed, of 1,500 RPM in 4th gear.
The vehicle was tied down with the same degree of tension (+ or -), as all the previous pulls.
The end result...
A very impressive 295.8 rwkw.
'Nuff said!
Just kidding, what a tease, lol.
All the details will be provided shortly.
Cheers,
JD.