Hey Andy,
Just for your reference, the rims for my "race setup" are 17x9 50 mm offset with a 12.5mm spacer up front. I run a 255-40 RE71R, have 3.3* front camber and have a slight rub on a hard bump, nothing while racing. There's a few mm clearance between the tire and Koni shock body. I could probably get a 265 without modifying the front fenders but would need about 4* camber which would probably be to much. I have the same springs as you but have a 1/2" spacer on the front and rear to raise the car 1/2".
Since you're that far from me I could probably bring a couple and either meet you somewhere or at your place and you could put them on for you visual reference.
__________________
Jim
2011 135i DCT - FBO PS2
1Mpostr
|