Hi,
I purchased the Monitor module for MHD and did 2 pulls.
https://datazap.me/u/nonoxx/log-1550...og=0&data=3-11
DSC was fully off, and with my winter tires and the moisture on the road I had some amount of skid under 4000 rpm.
Anyways these logs show that the DME pulls a significant amount of timing, especially on cylinder 5.
I use good quality 98 RON gas and the air temperature today is low (about 2-4 celsius) so I think those two factors can be put aside.
For me, this indicates at least I need new spark plugs, worst case even coil packs.