Quote:
Originally Posted by Zuzu
Hey John.. Just looking at your pedal instal pix..
Did you remove the backing tape on the dead pedal and just screw in.
Also..the clutch and brake pedals.. looks like you only installed with 2 screws, not 3.. Is this cause they are slightly to large.
|
Nup, left the tape and put two decent counter sunk screws into the dead pedal.
Yes, only two per pedal, they only come with two for each. The template doesn't work either, I suggest it is for the LHD market only. The brake pedal, being metal, is a bitch to mark and drill, advice, mark one and mount the pedal withe the one nut and bolt then use a larger drill bit to score the pedal for the other hole then drill with a smaller bit first.
The clutch and accelerator are plastic so are much easier to drill.
The only thing I am not happy about is the clutch pedal catching EVERYTIME you depress on the Jezzer mats. May have to Velcro the mats to the carpet at the top under the dash.