Quote:
Originally Posted by juld0zer
You need a C spanner.
Gently slip off the waistline trim piece (it will warp if you mishandle it). Use a plastic tool to work it off the door bit by bit.
Slacken both adjusters and perform your adjustment. I like to use a sheet of copy paper to test. The paper shouldn't rip but it also shouldn't pull out with no resistance. You want the glass to hold the paper with some moderate resistance.
After you're happy with the adjustment, tighten and put everything back. Then hose test it
|
What do adjustors look like/what kind of tool is needed to adjust ? C Spanner? What size etc