Quote:
Originally Posted by fe1rx
Based on my measurements:
ID = 14 mm
OD = 46 mm
Height = 52 mm
Unfortunately the installation instructions do not list the part number so you would have to contact Ohlins for that. The kit I used was BMS M100.
|
Hello,
thank you for your answer.
I finally find the P/N it is 24630-03
https://www.1addicts.com/forums/atta...7&d=1415689059
Sadly is it difficult to buy it in France, so i decided to customize and cut my M-performance Bumpstop to 46mm of length.
I now have ~29mm (75-46) of shock travel from ride height (75mm) before bump stop engage.
Is is really better now; really less harsh. more compliant & smooth.
my setup is Bilstein B8 + Bmw Performance Springs & swaybar, Front 1M LCA, Rear 1M subframe bushings.
Now that the rear axle feel really nice, the Front axle is a little harsh, i ask myself if it is a good idea to swap the front performance sway bar by the original M-sport now that my performance front springs are stiffer than before (M Sport).
What do you think about it?
Thank you!