View Single Post
      02-18-2020, 09:00 AM   #229
Suprgnat
Слава Украине!
Suprgnat's Avatar
Ukraine
2272
Rep
2,424
Posts

Drives: 2013 128i LMB 6MT ZMP Slicktop
Join Date: Jan 2013
Location: California

iTrader: (7)

Garage List
2013 128i  [9.58]
Quote:
Originally Posted by berns View Post
What about E9x M3 hubs/knuckles? Wonder if they're interchangeable too, while still keeping the non-m subframe/diff/axles.
I pulled up photos on ECS and was surprised how different they are though both the 135i and M coupe use the same collar nut, clip, and bearing but use a different output flange. The suspension pick-up point look to be in very different positions. Check out the lengths of the bosses holding the trailing arm bushing and toe arm. Also note the relative position of the sway bar mount to the toe arm.

Maybe the M knuckle with 135i 33416771082 or 330i/335i 33416760058 drive flanges and 33207580945/46 or 33207568730/31 axles depending on the pumpkin, but it's hard to tell from the photos if the M knuckles poke out more (or less) and would require a longer (or shorter) drive axles.

135i:


1M/M3
__________________
Inertia is the enemy!
My car's photo history: https://www.1addicts.com/forums/show....php?t=1570551
Appreciate 1
lab_rat394.50