|
Great pics, many thanks. I will probably have to do this one day.
Just for the record though, I've been clearing the washer system (usual problem with gunk on the pump filters) on my recently acquired 135i. I used this as a "try before bottle removal" method:
1. Got a 1.5 metre length of 10 mm OD clear plastic tube and carefully fed it to the bottom of the washer bottle - it took a couple of attempts.
2. Syphoned out the bottle into a bucket and then refilled with about 2-3 litres of clean, very warm water.
3. Blew hard down the tube a few times to try to agitate the stuff in the bottom of the bottle and around the filters and immediately syphoned that out.
4. Repeated this about 10 times until only clear water came out.
Refilled the system with clean water and it has been working fine for the last few days.
|