|
yeah, i totally agree. It honestly is a little more work. But a lot of the downside is gone if you go to the -AN fittings in my opinion.
They make filters that go inline either on the high pressure or low pressure side so you don't have to clean the nozzles, just the filter. But, if you are super clean and careful when filling the tank (which i can tell you are) the cleaning part doesn't really apply. I didn't even have a filter on mine, other than the screen in the nozzle itself, and it was clean when i removed it (probably 10k miles).
Not having to deal with filling the tank in the trunk (which was an event in itself, since i would transfer it from the 5 gallon drum to a 1 gallon water container using a funnel with a screen filter, then filling the meth tank) and not having a tank filled with gas in my trunk is also nice.
Anyway, would be glad to share any info on that front if you end up going that direction.
|