Quote:
Originally Posted by octironSmith
Quick question - What're you using to code out the airbag warning?
|
Bimmergeeks ProTools is a very simple approach to coding out the features that are removed when you remove the original seats. ProTools runs on an Android device and interfaces either by cable or Bluetooth.
Top Menu:
Choose "Chassis"
Choose "DSC - ABS"
Choose "Coding" and you will find all the required items. In my case, coding out the following was needed to remove manual sport seats:
- ProTools Description (Parameter)
- Seatbelt Warning Master (CC_GURTWARNUNG_1)
- Passenger Seatbelt Warning (SBR_BEIFAHRER_1)
- Passenger Seatbelt Warning 2 (SBR_PREWARNING_BF_MRS)
- Seatbelt Warning Driver (SBR_FAHRER_1)
- Driver Seatbelt Warning 2 (SBR_PREWARNING_FA_MRS)
- Seat Mat Sensor (OC3_1)
- Passenger Seat Mat 2 (GK_OC3_POL)
- Driver Seat Position Sensor (SPSF_1_CD)
- Driver Seatbelt Contact (GURTKONTAKT_FAHRER_1)
- Driver Seatbelt Tensioner (GURTSTRAFFER_FAHRER_2)
- Left Side Airbag (SIDEBAG_LINKS_1)
- Passenger Seat Position Sensor (SPSBF_1)
- Passenger Seatbelt Contact (GURTKONTAKT_BEIFAHRER_1)
- Passenger Seatbelt Tensioner (GURTSTRAFFER_BEIFAHRER_2)
- Right Side Airbag (SIDEBAG_RECHTS_1)
As a practical matter, remove the seats then check for errors. Then code "not active" the parameter associated with each error.