Quote:
Originally Posted by 1&done
Did you run logs and remap?
|
Yes MHD Stage 2+, i am hitting my targets, the spool seems just a bit slower than with the stock FMIC.
The thread i was talking about :
http://f30.bimmerpost.com/forums/sho....php?t=1088334
"On a sidenote I previously had the following 2 FMIC's on the car:
- Forge FMIC: Bar and plate, similar size as stock fmic but quite a bit more heavy. While cooling being it a lot better it also came at great pressure drop. For reference it only gave 18 psi peak at 5k rpm then dropped to 15 psi at 6k rpm and 14.5 at 6.5k rpm.
My 60-120 time decreased by 0.5 seconds (performance box logged) even though IAT were a lot cooler than stock fmic. The pressure drop was just too much. Since Forge advertised same pressure drop as stock fmic they allowed me to return the fmic at no cost and refund me. They also removed the no pressure drop part on their website "