View Single Post
      08-07-2012, 07:30 PM   #6
1911A145's Avatar

Drives: 135i
Join Date: Mar 2012
Location: Port Saint Lucie, FL

iTrader: (4)

I would say your speed is too slow and you need to crank her up to about 6. I run a LC orange pad on small area with a quarter amount of product. I move the porter cable at a speed of 3 inches every 1 second. remove product on paint right away after finished with small area. Make sure you are at least under shade because the paint being hot is a no go. then do a second pass with a less aggresive pad and you should see much better results.

Last edited by 1911A145; 08-07-2012 at 07:36 PM.