And further to my post, I just received by EBC Redstuffs to do the rears tomorrow morning. HELP. They came with a metal bracket stuck on the back which appears to be removable. Can anyone confirm whether with EBC I'll use the OEM bracket over the back of the EBC? Doubled up? Or do I need to remove the EBC and replace with the OEM?
Also, the pads appear to have the sensor notch, but the brackets themselves do not have the notch. So that the bracket covers the notch cut into the pad. What's up with that?
Edit: Just pryed off the plate from the OEM that had the notch for the sensor and slapped that on after taking off the EBC one.
Last edited by CRYA; 10-09-2016 at 02:31 PM..
|