Quote:
Originally Posted by WDE82
I GOT IT on my 128i no nav! It's quite simple. Everyone always only mentions FA_write to the CAS. But you must also go to FRM and NFRM to remove $2VB from the VO. I pressed delete 3 total times in the VO menus. Once in CAS, once in FRM, once in NFRM. Then you do FA_write.
Remove fuse 27 (TPMS fuse)
Using E89 chassis in NCS.
You must remove $2VB from CAS, FRM, and NFRM using NCSExpert under the FA/VO menu. Then you must FA_write to CAS and NFRM. This is the key part nobody mentions. You have to change the VO in all locations that exist.
Then sg_codieren to DSC and KOMBI. May have to add CAPPL/CIC for Nav but I don't have it so I'm not sure.
My light is gone. Next I will try to activate the Euro style FTM.
Note: you will lose your time and date settings and your ABS/DSC error warning will appear for a moment. Don't panic.
|
This is gold! Thank you!
The fuse for my E92 335i non-iDrive was 13 and 28. I pulled both and my Homelink stopped working since 28 was shared with it. I put fuse 28 back in and left 13 out. And it worked!
While in there, I also pulled 25 to disable to Seatbelt Arm.