BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i) - View Single Post - *Actual* anti-roll bar dimensions?

tracer bullet · 07-26-2011, 06:30 PM

31352283515 = Front, E92 M3, coupe = 26.5mm per the internet and also as measured

33552283655 = Rear, ?, ?, ? = 22.5mm as measured

I thought 33552283655 was the Rear E92 M3 coupe, but perhaps not? Real OEM says that's what it's for. Also seeing that realoem has it listed as 22.5mm, which is correct: http://www.realoem.com/bmw/showparts...11&hg=33&fg=45

I have the bars, bushings, brackets, etc. so I'm good on that. Just wondering what the heck I have. 'Cause it sure isn't 20mm like we always see posted and written over and over again.

07-26-2011, 06:30 PM	#3
tracer bullet Brigadier General 2412 Rep 3,548 Posts Drives: '11 135i , '15 X3 35i Join Date: May 2011 Location: Saint Paul, MN iTrader: (1)	31352283515 = Front, E92 M3, coupe = 26.5mm per the internet and also as measured 33552283655 = Rear, ?, ?, ? = 22.5mm as measured I thought 33552283655 was the Rear E92 M3 coupe, but perhaps not? Real OEM says that's what it's for. Also seeing that realoem has it listed as 22.5mm, which is correct: http://www.realoem.com/bmw/showparts...11&hg=33&fg=45 I have the bars, bushings, brackets, etc. so I'm good on that. Just wondering what the heck I have. 'Cause it sure isn't 20mm like we always see posted and written over and over again. Last edited by tracer bullet; 07-26-2011 at 06:39 PM..
	Appreciate 0 Quote